Water Change

This is how I currently do my water changes for the main display tank:

Equipments:
-Aqueon Water Changer
-10gal container glued on a dolly
-heater
-airstone
-Prime (water conditioner)
-Eheim Water Pump 1000 connected to a 5ft 5/8 hose

PREPARING TAP WATER
1. Filling the 10gal container with tap water from the sink using the Aqueon water changer.
2. Put in enough Prime for 10 gal of tap water
3. Use an air stone to keep the water aerated
4. Have a heater in the barrel, but only turn it on the night before the water change.
5. Let the water age for at least 24 hours.

 Filling the container with tap water using the Aqueon water changer.

Condition the water with Prime, aerate with airstone. Age for at least 24 hours.

WATER CHANGE
1. Vacuum and take out 10 gal of old water from aquarium.
2. Using Eheim 1000 water pump, pump the 10 gal of aged water from the container back to the tank.

Vaccum and take out old water from the main tank using the Aqueon water changer.

 

Pump back the 10 gal of aged water from the container back to the tank. Made ease thanks to the Eheim water pump